Lewis Acid Research Articles

Revealing the impact of thermal annealing on the perovskite/organic bulk heterojunction interface in photovoltaic devices.

Perovskite/organic bulk heterojunction (BHJ) integrated solar cells have tremendous development potential to exceed the Shockley-Queisser limit efficiency of single-junction photovoltaics, due to the merits of spectra response extension. However, the presence of energy level barriers and severe non-radiative recombination at the interface between perovskite and BHJ greatly hindered the transport and collection of charge carriers, usually leading to large Voc and photocurrent loss, as well as the stability degradation of integrated devices. Therefore, investigating the interface properties of perovskite/BHJ is crucial for understanding the charge transport process and enhancing device performance. In this study, we effectively regulated the interface properties and charge transport in perovskite/BHJ integrated devices using a thermal annealing process. Using Kelvin probe microscopy, photoluminescence, and transient absorption spectroscopy, we revealed that moderate annealing treatment would contribute to forming close interface contact and provide more channels or pathways for charge transfer, which is advantageous for the interface charge collection and device performance. In addition, the lone pair electrons of acyl, thiophene and pyrrole function groups in polymer PDPP3T and PCBM can act as the Lewis base and provide electrons to the under-coordinated lead atoms or clusters in the perovskite, effectively passivating traps on the surface and grain boundaries of the perovskite through Lewis acid-base coordination. Finally, we improved the photovoltaic conversion efficiency of the device to 21.57% with enhanced stability using an optimized thermal annealing process. This study provides a comprehensive understanding of the integrated perovskite/BHJ interface properties, which could be extended to other optoelectronic devices based on a similar integrated structure.

Enhanced generation of aromatic-enriched bio-oil from sewage sludge pyrolysis using zeolite-based catalysts under H2-rich conditions

Sewage sludge is solid waste resulting from wastewater treatment processes, and its improper management adversely affects the environment and human health. This study aims to convert sewage sludge into valuable aromatics, including benzene, toluene, ethylbenzene, and xylenes, or BTEX, via the catalytic pyrolysis using mono- and bimetal-modified protonated Zeolite Socony Mobil–5, or HZSM-5, catalysts under nitrogen, methane and methane decomposition conditions. In the methane medium, HZSM-5 yielded more BTEX (20.91 wt%) compared to those obtained using protonated Y zeolite (HY) (17.24 wt%) and protonated beta zeolite (Hβ) (11.70 wt%) owing to its proper acidity, higher shape selectivity, and higher methane activation. When HZSM-5 is used, the BTEX yield increased considerably in the methane decomposition environment (27 wt%), 1.29 and 1.46 times higher than those produced under methane and nitrogen, respectively. This increase is attributed to the dual effects of the surplus in situ hydrogen (H2) and direct involvement of methane, which resulted in accelerated hydrocracking, hydrodeoxygenation, and co-aromatization reactions. Under methane decomposition conditions, the use of the Ni/HZSM-5, Mo/HZSM-5, and Ni-Mo/HZSM-5 catalysts led to 1.23-, 1.30-, and 1.66-fold increases in BTEX production, respectively, than that of the parent HZSM-5, owing to the dual effects of acidity enhanced by the newly formed Lewis acid sites, increased oxygen vacancies, and improved physical properties of the catalysts. Hence, the catalytic pyrolysis of sewage sludge using mono- and bimetal-modified HZSM-5 catalysts in a H2-rich environment proposed in this study is expected to be an efficient and sustainable method for converting undesirable materials into valuable biofuels.

Carbene-Stabilized Phosphagermylenylidene: A Heavier Analog of Isonitrile.

Phosphagermylenylidenes (R-P═Ge), as heavier analogs of isonitriles, whether in their free state or as complexes with a Lewis base, have not been previously identified as isolable entities. In this study, we report the synthesis of a stable monomeric phosphagermylenylidene within the coordination sphere of a Lewis base under ambient conditions. This species was synthesized by Lewis base-induced dedimerization of a cyclic phosphagermylenylidene dimer or via Me3SiCl elimination from a phosphinochlorogermylene framework. The deliberate integration of a bulky, electropositive N-heterocyclic boryl group at the phosphorus site, combined with coordination stabilization by a cyclic (alkyl)(amino)carbene at the low-valent germanium site, effectively mitigated its natural tendency toward oligomerization. Structural analyses and theoretical calculations have demonstrated that this unprecedented species features a P═Ge double bond, characterized by conventional electron-sharing π and σ bonds, complemented by lone pairs at both the phosphorus and germanium atoms. Preliminary reactivity studies show that this base-stabilized phosphagermylenylidene demonstrates facile release of ligands at the Ge atom, coordination to silver through the lone pair on P, and versatile reactivity including both (cyclo)addition and cleavage of the P═Ge double bond.

High-Entropy Lanthanide-Organic Framework as an Efficient Heterogeneous Catalyst for Cycloaddition of CO2 with Epoxides and Knoevenagel Condensation.

Multimetallic synergistic effects have the potential to improve CO2 cycloesterification and Knoevenagel reaction processes, outperforming monometallic MOFs. The results demonstrate superior performance in these processes. To investigate this, we created and characterized a selection of single-component Ln(III)-MOFs (Ln = Eu, Tb, Gd, Dy, Ho) and high-entropy lanthanide-organic framework (HE-LnMOF) using solvent-thermal conditions. The experiments revealed that HE-LnMOF exhibited heightened catalytic efficiency in CO2 cycloesterification and Knoevenagel reactions compared to single-component Ln(III) MOFs. Moreover, the HE-LnMOF displayed significant stability, maintaining their structural integrity after five cycles while sustaining elevated conversion and selectivity rates. The feasible mechanisms of catalytic reactions were also discussed. HE-LnMOF possess multiple unsaturated metal centers, acting as Lewis acid sites, with oxygen atoms connecting the metal, and hydroxyl groups on the ligand serving as base sites. This study introduces a novel method for synthesizing HE-LnMOF and presents a fresh application of HE-LnMOF for converting CO2.

Switching between the [2π+2σ] and Hetero‐[4π+2σ] Cycloaddition Reactivity of Bicyclobutanes with Lewis Acid Catalysts Enables the Synthesis of Spirocycles and Bridged Heterocycles

The exploration of the complex chemical diversity of bicyclo[n.1.1]alkanes and their use as benzene bioisosteres has garnered significant attention over the past two decades. Regiodivergent syntheses of thiabicyclo[4.1.1]octanes (S‐BCOs) and highly substituted bicyclo[2.1.1]hexanes (BCHs) using a Lewis acid‐catalyzed formal cycloaddition of bicyclobutanes (BCBs) and 3‐benzylideneindoline‐2‐thione derivatives have been established. The first hetero‐(4+3) cycloaddition of BCBs, catalyzed by Zn(OTf)2, was achieved with a broad substrate scope under mild conditions. In contrast, the less electrophilic BCB ester undergoes a Sc(OTf)3‐catalyzed [2π+2σ] reaction with 1,1,2‐trisubstituted alkenes, yielding BCHs with a spirocyclic quaternary carbon center. Control experiments and preliminary theoretical calculations suggest that the diastereoselective [2π+2σ] product formation may involve a concerted cycloaddition between a zwitterionic intermediate and E‐1,1,2‐trisubstituted alkenes. Additionally, the hetero‐(4+3) cycloaddition may involve a concerted nucleophilic ring‐opening mechanism.

Switching between the [2π+2σ] and Hetero-[4π+2σ] Cycloaddition Reactivity of Bicyclobutanes with Lewis Acid Catalysts Enables the Synthesis of Spirocycles and Bridged Heterocycles.

The exploration of the complex chemical diversity of bicyclo[n.1.1]alkanes and their use as benzene bioisosteres has garnered significant attention over the past two decades. Regiodivergent syntheses of thiabicyclo[4.1.1]octanes (S-BCOs) and highly substituted bicyclo[2.1.1]hexanes (BCHs) using a Lewis acid-catalyzed formal cycloaddition of bicyclobutanes (BCBs) and 3-benzylideneindoline-2-thione derivatives have been established. The first hetero-(4+3) cycloaddition of BCBs, catalyzed by Zn(OTf)2, was achieved with a broad substrate scope under mild conditions. In contrast, the less electrophilic BCB ester undergoes a Sc(OTf)3-catalyzed [2π+2σ] reaction with 1,1,2-trisubstituted alkenes, yielding BCHs with a spirocyclic quaternary carbon center. Control experiments and preliminary theoretical calculations suggest that the diastereoselective [2π+2σ] product formation may involve a concerted cycloaddition between a zwitterionic intermediate and E-1,1,2-trisubstituted alkenes. Additionally, the hetero-(4+3) cycloaddition may involve a concerted nucleophilic ring-opening mechanism.

Zeolitic Imidazolate Frameworks Based Anticancer Drug Delivery System Associated with Dual Action of Surface Charge and Lewis Base Ligand

AbstractZeolitic imidazole frameworks (ZIFs), which combine the favorable characteristics of tunable porosity, controlled structure, and facile functionalization, are explored as a novel class of nanocarriers for biomedical applications. In this study, different ZIF materials are investigated, including ZIF‐8, ZIF‐67, ZIF‐90, ZIF‐92, and ZIF‐108, with the same sodalite topology as the adenosine‐5′‐triphosphate (ATP)‐triggered drug delivery systems. Results indicated that ZIF‐90 and ZIF‐108 displayed good biological compatibility and efficiently accumulated in the mitochondria through competitive coordination between the metal nodes of the ZIFs and ATP, suggesting efficient intracellular delivery. With further interactions between these metal ions and ATP, the encapsulated drugs are released from the ZIF nanoparticles, thereby achieving optimal anti‐tumor activity. Through a systematic evaluation of the physicochemical properties of different ZIFs, it demonstrates that the surface charges of ZIFs have a significant impact on the cytotoxicity of cells, whereas the Lewis basicity of imidazole‐based ligands plays an essential role in the competitive coordination between the metal ions and ATP. These findings provide a potential method for screening ZIFs based nanocarriers with minimal toxicity and explain the different delivery efficiencies of these materials with similar topologies.

Synergistic flame retardancy of aluminum diethylphosphinate and piperazine pyrophosphate/β‐cyclodextrin in polylactic acid

AbstractPolylactic acid has good biodegradability and processability, but its flammability and serious droplet characteristics limit its development and application. Therefore, developing safer flame‐retardant PLA materials is crucial. This research develops a novel flame‐retardant polylactic acid (PLA) material blend, utilizing aluminum diethylphosphinate (AlPi), piperazine pyrophosphate (PAPP), and β‐cyclodextrin. Optimal synergy occurs at a 5:1 PAPP/β‐CD mass ratio with 4 wt.% AlPi. This combination significantly reduces the heat release peak from 294.89 to 144.21 kW·m−2 and generates non‐combustible residues. The sample forms a stable, uniform carbon layer during combustion due to hydrogen bond crosslinking and Lewis acid–base reactions. The activation energy (Eα) is raised from 264.99 to 281.08 kJ·mol−1 between 312 and 402°C. Thus, an AlPi‐PAPP‐β‐CD based P‐C‐N composite flame retardant is investigated, offering a promising research direction for developing fire‐safe polylactic acid materials. This research may yield valuable insights for diverse applications.

Tailored Metal-Organic Frameworks for Water Purification: Perfluorinated Fe-MOFs for Enhanced Heterogeneous Catalytic Ozonation.

An industrially viable catalyst for heterogeneous catalytic ozonation (HCO) in water purification requires the characteristics of good dispersion of active species on its surface, efficient electron transfer for ozone decay, and maximum active species utilization. While metal-organic frameworks (MOFs) represent an attractive platform for HCO, the metal nodes in the unmodified MOFs exhibit low catalytic activity. Herein, we present a perfluorinated Fe-MOF catalyst by substituting H atoms on the metalated ligands with F atoms (termed 4F-MIL-88B) to induce structure evolution. The Lewis acidity of 4F-MIL-88B was enhanced via the formation of Fe nodes, tailoring the electron distribution on the catalyst surface. As a result of catalyst modification, the rate constant for degradation of the target compounds examined increased by ∼700% compared with that observed for the unmodified catalyst. Experimental evidence and theoretical calculations showed that the modulated polarity and the enhanced electron transfer between the catalyst and ozone molecules contributed to the adsorption and transformation of O3 to •OH on the catalyst surface. Overall, the results of this study highlight the significance of tailoring the metalated ligands to develop highly efficient and stable MOF catalysts for HCO and provide an in-depth mechanistic understanding of their structure-function evolution, which is expected to facilitate the applications of nanomaterial-based processes in water purification.

Design, Preparation, and Implementation of Axially Chiral Benzotetramisoles as Lewis Base Catalysts for Asymmetric Cycloadditions

Developing novel catalysts with potent activity is of great importance in organocatalysis. In this study, we designed and prepared a new class of benzotetramisole Lewis base catalysts (AxBTM) that have both central and axial chirality. This unique feature of these catalysts results in a three‐dimensional microenvironment with multi‐layers of chirality. The performance of the developed catalysts was tested in a series of cycloaddition reactions. These included the AxBTM‐catalyzed (2 + 2) cycloaddition between α‐fluoro‐α‐aryl anhydride with imines or oxindoles, and the sequential gold/AxBTM‐catalyzed (4 + 2) cycloaddition of enynamides with pentafluorophenyl esters. The interplay between axial and central chirality had a collaborative effect in regulating the stereochemistry in these cycloadditions, leading to high levels of stereoselectivity that would otherwise be challenging to achieve using conventional BTM catalysts. However, the (2 + 2) and (4 + 2) cycloadditions have different predilections for axial and central chirality combinations.

Design, Preparation, and Implementation of Axially Chiral Benzotetramisoles as Lewis Base Catalysts for Asymmetric Cycloadditions.

Developing novel catalysts with potent activity is of great importance in organocatalysis. In this study, we designed and prepared a new class of benzotetramisole Lewis base catalysts (AxBTM) that have both central and axial chirality. This unique feature of these catalysts results in a three-dimensional microenvironment with multi-layers of chirality. The performance of the developed catalysts was tested in a series of cycloaddition reactions. These included the AxBTM-catalyzed (2 + 2) cycloaddition between α-fluoro-α-aryl anhydride with imines or oxindoles, and the sequential gold/AxBTM-catalyzed (4 + 2) cycloaddition of enynamides with pentafluorophenyl esters. The interplay between axial and central chirality had a collaborative effect in regulating the stereochemistry in these cycloadditions, leading to high levels of stereoselectivity that would otherwise be challenging to achieve using conventional BTM catalysts. However, the (2 + 2) and (4 + 2) cycloadditions have different predilections for axial and central chirality combinations.

Fabrication of Nitrogen Based Magnetic Conjugated Microporous Polymer for Efficient Extraction of Neonicotinoids in Water Samples

Facile and sensitive methods for detecting neonicotinoids (NEOs) in aquatic environments are crucial because they are found in extremely low concentrations in complex matrices. Herein, nitrogen-based magnetic conjugated microporous polymers (Fe3O4@N-CMP) with quaternary ammonium groups were synthesized for efficient magnetic solid-phase extraction (MSPE) of NEOs from tap water, rainwater, and lake water. Fe3O4@N-CMP possessed a suitable specific surface area, extended π-conjugated system, and numerous cationic groups. These properties endow Fe3O4@N-CMP with superior extraction efficiency toward NEOs. The excellent adsorption capacity of Fe3O4@N-CMP toward NEOs was attributed to its π–π stacking, Lewis acid–base, and electrostatic interactions. The proposed MSPE-HPLC-DAD approach based on Fe3O4@N-CMP exhibited a wide linear range (0.1–200 µg/L), low detection limits (0.3–0.5 µg/L), satisfactory precision, and acceptable reproducibility under optimal conditions. In addition, the established method was effectively utilized for the analysis of NEOs in tap water, rainwater, and lake water. Excellent recoveries of NEOs at three spiked levels were in the range of 70.4 to 122.7%, with RSDs less than 10%. This study provides a reliable pretreatment method for monitoring NEOs in environmental water samples.

Germaaluminocenes-Masked Heterofulvenes.

Germaaluminocenes are formed by salt metathesis reactions of dipotassium germacyclopentadienediides with pentamethylcyclopentadienylaluminum dichloride. The reactivity pattern of these sandwich complexes is determined by the electrophilic central aluminum atom and by the nucleophilic dicoordinated germanium center. Surprisingly, the products formed by reactions with Lewis acids, Lewis bases, amphiphiles and compounds with polar double bonds are those expected from the reaction of a hypothetical aluminagermapentafulvene with these types of reagents. This suggests that germaaluminocenes are synthetic equivalents to these pentafulvenes.

Catalytic Intramolecular Ketone Haloacylation Enabled Stereoselective Heterolytic Cleavage of Cyclopropyl Ketones with Enhanced Reactivity and Regioselectivity beyond Electronics.

By integration of oxocarbenium activation and Lewis acid coordination activation via conformational proximity-driven, Pd(II)- or Cu(I)-catalyzed intramolecular ketone haloacylation, regio- and stereoselective heterolytic ring-opening 1,5-haloacylation of cyclopropyl ketones, including those with weak single alkyl donors, has been developed for the synthesis of valuable α-quaternary halo-γ-butenolides. The vicinal carboxylic acid and ketone acceptors are no longer just spectator activators. Further, this reaction delivers a constant regioselectivity regardless of the electronic nature of substituents, even the malonate.

Double core–shell hollow nanocage CuO@Co3O4 for the selective hydrogenolysis of C–O bonds of lignin without external hydrogen

The design of a highly active Cu-Co catalyst for catalytic transfer hydrogenolysis of lignin without the use of external hydrogen remains highly challenging. In this work, Cu2O was initially encapsulated in ZIF-67, and subsequently Cu2O@ZIF-67 was utilized as a precursor and sacrificial template to prepare the unique double core–shell hollow nanocage CuO@Co3O4. Co and Cu, serving as Lewis acid sites and dehydrogenation sites for the hydrogen-donor solvent isopropanol, respectively, exhibited synergistic enhancement, further increasing the catalytic activity. Under the optimal conditions of 220 °C, 1 MPa N2, and 4 h, the catalyst achieved 100 % conversion of 2-phenoxy-1-phenylethanol and 100 % yield towards cyclohexanol and ethylbenzene. Furthermore, the catalyst remained stable and reusable after 5 cycles, providing a practicable guidance for the value-added conversion of lignin.

Combined Photocatalysis and Lewis Acid Catalysis Strategy for the Oxa-Pictet–Spengler Reactions of Ethers

Combined Photocatalysis and Lewis Acid Catalysis Strategy for the Oxa-Pictet–Spengler Reactions of Ethers

Incorporating porous carbon materials into ionic liquid for high efficiency extraction of polycyclic aromatic hydrocarbons

Ionic liquid is an ideal candidate in the extraction of aromatic compounds. The design and construction of ionic liquids with high extraction efficiency and selectivity towards to the specific aromatics remain crucial question. In this paper, with the aid of orthogonal array experiment, the imidazolium-based ionic liquids with long alkyl chain on the cations were determined to possess high aromatics extraction efficiency. Furthermore, the Lewis acid anion was introduced into the ionic liquid to form 1-dodecyl-3-methylimidazolium ferric chloride ([C12mim][FeCl4]) and performed 62 % and 100 % extractant efficiency of naphthalene (NAP) and anthracene (ANT), respectively. Then the porous carbon materials (P1-1000) derived from hyper-crosslinked porous polymers (HCP) which possessed high BET surface area (1186 m2/g) was dispersed in [C12mim][FeCl4] to form porous ionic liquid. The single extraction efficiency of NAP improved from 62 % to 77 %. The great single extraction efficiency was attributed to the high porosity, additional adsorption sites provided by the Lewis acid anions and the hydrophobic long alkyl chain on the cations. After three times extraction, the concentration of NAP dropped down to 0. The porous ionic liquids also showed good recycle performance. The construction of porous ionic liquids provided an efficient approach for extraction of polycyclic aromatic hydrocarbons from aliphatic hydrocarbon.

Nonflammable Succinonitrile-Based Deep Eutectic Electrolyte for Intrinsically Safe High-Voltage Sodium-Ion Batteries.

Intrinsically safe sodium-ion batteries are considered as a promising candidate for large-scale energy storage systems. However, the high flammability of conventional electrolytes may pose serious safety threats and even explosions. Herein, a strategy of constructing a deep eutectic electrolyte is proposed to boost the safety and electrochemical performance of succinonitrile (SN)-based electrolyte. The strong hydrogen bond between S═O of 1,3,2-dioxathiolane-2,2-dioxide (DTD) and the α-H of SN endows the enhanced safety and compatibility of SN with Lewis bases. Meanwhile, the DTD participates in the inner Na+ sheath and weakens the coordination number of SN. The unique solvation configuration promotes the formation of robust gradient inorganic-rich electrode-electrolyte interphase, and merits stable cycling of half-cells in a wide temperature range, with a capacity retention of 82.8% after 800 cycles (25°C) and 86.3% after 100 cycles (60°C). Correspondingly, the full cells deliver tremendous improvement in cycling stability and rate performance.

Tandem hydrogenation/hydrogenolysis of furfural to 2-methylfuran over multifunctional metallic Cu nanoparticles supported ZIF-8 catalyst

Catalytic transfer hydrogenation (CTH), that employs protic solvents as hydrogen sources to alleviate the use of molecular hydrogen H2, has gained great attention. This work, reports multifunctional, metallic Cu nanoparticles supported ZIF-8 material for CTH of furfural to a highly valued fuel additive, 2-methylfuran (2-MF) using 2-propanol. Of all as-synthesized xCu(yM)/ZIF-8 catalysts with varied NaBH4 concentration (yM) and Cu loading (x), 11Cu(1.5 M)/ZIF-8 exhibited higher catalytic activity with > 99 % FAL conversion and 93.9 % 2-MF selectivity. This is ascribed to its high specific surface area, and existence of optimum amount of Lewis acid-base sites along with Cu0 species, which are responsible for hydrogenation of furfural to furfuryl alcohol and subsequent hydrogenolysis to produce 2-MF. The present work reports a highly efficient and stable, metal-MOF hybrid material for CTH of FAL to 2-MF, which is one among the best reports available in literature, therewith suggests a promising approach for bio-oil upgradation.

Two AIE-Ligand-Based 2-D Luminescent Metal-Organic Frameworks as Fe3+ Sensors.

The design and synthesis of high-performance sensors are very important but remain great challenges. In this work, a new aggregation-induced-emission (AIE) molecule 4,4'-(((9H-fluoren-9-ylidene)methylene)bis(4,1-phenylene))dipyridine (L) was successfully synthesized and first developed as a functional ligand to construct two isomorphic metal-organic frameworks (MOFs) [M(L)(OBBA)]n [M2+ = Cd2+ (1), Co2+ (2); H2OBBA = 4,4'-oxybisbenzoic acid]. They adopt [M2(COO)4] flywheel clusters, OBBA2- bridges, and terminal L ligands as building units to form isomorphic 2-D networks with Lewis base active cites (uncoordinated pyridyl N). Both 1 and 2 exhibit excellent water, pH, and thermal stabilities and extremely efficient Fe3+ sensing abilities in the water environment. The quenching constants and detection limits reach the best levels reported so far. The sensing mechanism of 1 and 2 toward Fe3+ is studied in depth, and the difference in their sensing performance is also explained.